9
Using the TV’s Features
Setting Channels
This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into
memory, skipping over unwanted channels.
Before selecting channels, they must be programmed into the TV’s memory. In addition to normal VHF and UHF channels,
this TV can receive up to 113 Cable TV channels. If you have an off-air antenna, set the
ANTENNA
menu option to
AIR
.
When shipped from the factory, this menu option is set to
CABLE
.
1. Press the MENU button (the Main menu appears).
2. Press the PROG.
or
button to highlight
PRESET
, then use the PROG. buttons again to highlight
ANTENNA
.
3. Press the VOL
or
button to change the signal type to the desired setting:
CABLE
(cable TV) or
AIR
(off-air
antenna).
4. Press the PROG.
or
button to highlight
AUTO PROGRAM
, then press the VOL
button to begin auto channel
search. This may take several seconds.
Adding / Deleting Channels
1. Press the MENU button (the Main menu appears).
2. Press the PROG.
or
button to highlight
PRESET
.
CH NO.
(Channel Number) is already highlighted.
3. Press the VOL
or
button or the number buttons to fi nd the channel you want to add or delete.
4. Press the PROG.
or
button to highlight
CH
(Channel), then press the VOL
or
button to select
ADDED
or
DELETED
.
5. Repeat steps 2 - 4 for each channel to be added or deleted.
Sleep Function
1. Press the TIMER button on the remote control to display the set time 120, 90, 60, 30, 0 minutes for time-off. The unit
automatically turns off when the set time has elapsed.
2. To cancel the sleep timer, press the TIMER button repeatedly until 0 is displayed.
Summary of Contents for 14B042
Page 23: ......