1.
Install the gusset to the inside of the tire carrier using 4 of the supplied 3/8
-
16 x 1 hex head bolts (8) 3/8 flat washers
and (4) 3/8
-
16 nylock nuts.
See Photo 1 and 2.
2.
Torque the 3/8 hardware to 35 ft
-
lbs. using a 9/16 wrench and socket.
See Photo 3.
3.
Install the adapter mount onto the front side of the carrier using 4 of the supplied 3/8
-
16 x 1 hex head bolts (8) 3/8
flat washers and (4) 3/8
-
16 nylock nuts. Torque to 35 ft
-
lbs. using a 9/16 wrench and socket.
See Photo 4.
4.
Install the wheel mount into the installed adapter mount using 3 of the supplied 1/2
-
13 x 1
-
1/4 hex head bolts (6) 1/2”
flat washers and (3) 1/2
-
13 nylock nuts.
See Photo 5.
Do not tighten at this time.
5.
Measure the wheel and tire that will be installed onto the mount. Laying a straight edge on the tire, take a measure-
ment of the tire height from the mounting flange of the wheel. Take measurement .
See Photo 6.
Photo 1
Photo 2
Photo 3
Photo 4
Photo 5
Photo 6
Install the gusset into the carrier.
Install the 3/8 hardware.
Tighten the installed hardware.
Install the adapter mount.
Install the adapter mount.
Take measurement of wheel and tire height.
INSTALLATION INSTRUCTONS
