RC Systems 10-0517, Operation Manual

Page: 9 / 51

UM-1096
Revision A 4
3.2 Mounting the Enclosure
Install the detector to a wall or bracket using the predrilled mounting flanges shown in
Figure 1. If remote sensor option is included see Figure 2 for mounting dimensions of the
sensor housing.
After you have determined the appropriate location for your gas detector, it is important to securely
mount the gas detector using the predrilled mounting flanges on the enclosure (Figure1) . Dimensions
for the mounting holes can be found for both the aluminum and poly enclosures in Figure 2.
Figure 1 SensePoint Mounting Dimensions