9
PRECISE HOVERING
This drone is equipped with GPS which enable it to hover in a position
precisely. Accuracy will fluctuate according to the GPS signal in the flight
area.
1. Complete the GPS calibration process and have the drone at
“ready to fly” status.
2. Press the One-key Take-off button.
3. Choose a spot in the sky and the drone will remain in that spot.
4. Adjust the height of this spot using the right control stick.
Trimming is manual adjustment of the drone’s flight angles. It should only
be used when the drone is drifting instead of hovering in a secure space
with no wind. Please follow these instructions in order to trim your drone:
Hold #8 the trim button for 3 seconds into trim mode,
#21 indicador flashing.
1. If the drone floats forwards, the operator shall pull
the right lever backwards to adjust.
2. If the drone floats backward, the operator shall pull
the right lever forwards to adjust.
3. If the drone floats leftward, the operator shall pull
the right lever rightwards to adjust.
4. If the drone deviates rightward, the operator shall
pull the right lever leftwards to adjust.
The trimming can be made repeatedly till it flies steadily.
Then press #8 the trim button to exit, and #21 indicator
turns off.
Note: No need to trim under the GPS mode.
TRIMMING INSTRUCTIONS
8
21
