Q C 4 5 0 - I
Changes at the Reverse
switches
may b e a c c o m p l i s h e d during the remote control (TX ) o n l y with not
attached Flugakku, since i t can come otherwise to u n e x p e c t e d reactions of the Models.
2 .
E x a m i n a t i o n o f t h e c o n f i g u r a t i o n
Lead the configuration of the Quadrocopters as through in the chapter
configuration
descriptive. Training of the channels is
absolutely necessary, since anderenfals one the Quadrocopter does not recognize your transmitter. As soon as you
accomplished this, the Quadrocopter is r eady for flight (Neutralage before still einstelen!).
Of the optionally available aux iliary set when using Conrad the Quadrocopter is already finished for this
transmitter (4-Kanal) configures and training the channels is not not necessary! In the case of use o f a n o w n
computer remot e control plant a b s o l u t e l y w ithout mix ers in the standard program fly! M ultiplex
remote control: Servo minutes for all four functions (gas, roles, noddi ng and cr aving) from „M PX "t o
„UNIVERSITY "change over.
3 .
N e u t r a l s i t u a t i o n s t o p
So that the Stablisierung of the Quadrocopters works correctly, the Neutralage must be eingestelt. This is
tried those the Quadrocopter to stablisieren, if no other flight maneuver
is
desired.
Proceed t h e r e b y in t h e f o l l o w i n g order:
1)
They scolded the transmitter
2)
S t e l e n it GAS on n u l and ale other lever and trims on neutral
3)
P l a c e to the Quadrocopter o n a horizontal, even surf ace!
4)
Attach the accumulator at the Quadrocopter
5)
The red LED of the Quadrocopters must be OUT and the green ON
6)
Move
GAS o n full-scale and GREED o n right full -scale (see fig. 08)
7)
The green LED of the
Quadrocopters
flashes
a s c o n f i r m a t i o n and the
Neutralage is stored.
