•
Cut out the holes for the servos and for the motor stick on the fuselage. The elevator servo
should be about 1/2"-1" (1.5-2.5cm) from the aileron servo.
•
Glue the fuselage to the bottom of the wing.
•
Cut a hole for the ESC in one of the fuselage reinforcement sides. Also cut out notches in those
sides for the battery strap.
•
Glue the sides around the front of the fuselage. Sand them to match the shape of the fuselage.
•
Tape a bamboo skewer to the leading edge of the vertical fin leaving 1-1.5" (3-4cm) of the
sharp edge sticking out of the bottom.
Fig. 6: Battery mounting strap
