7
1-877-519-9090
Step 1:
Disconnect the battery. Begin with the negative battery terminal, followed by the positive terminal.
Step 2
:
Install the rear passenger side motor using M8 hex bolts, flat washers, split lock washers on the two pinch seam mounting
holes. Install the spacer between the pinch seam and the motor assembly. Leave all of the hardware snug and hand tight.
Step 3:
Install an M8 hex bolt, flat washer, and split lock
washer to secure the back side of the rear passenger side
motor to the rocker panel. Leave the hardware snug and
hand tight.
INSTALLATION INSTRUCTIONS
Step 2A
Step 2B
Step 3
Step 4
Step 5
Step 4:
Install the rear driver side motor using M8 hex
bolts, flat washer, and split lock washer on the two pinch
seam mounts. Use a hex bolt and split lock washer to
attach the motor to the mounting bracket installed in
Step 2. Leave all of the hardware snug and hand tight.
Step 5:
. Install an M8 hex bolt, flat washer, and split lock
washer to secure the back side of the front passenger
side motor to the rocker panel. Leave the hardware snug
and hand tight.
