background image

14

WWW.ROLLINGBIGPOWER.COM

Rolling Big Power believes in true customer satisfaction. We strive to provide you, our 
customer, with a delightful experience with our products. In the event that your experience 
is not delightful - please contact us and allow one of our professional customer service 
agents take care of you. Our primary goal is for you to become a customer for life - we’re 
willing to earn it. 

Rolling Big Power warrants that any RBP product purchased from an RBP Authorized 
Resellers will be free from any defects in manufacturing, materials and workmanship for 
five years from original date of purchase, for the original purchaser for the product installed 
on the purchaser’s original vehicle. Please validate your warranty by REGISTERING YOUR 
RBP PRODUCT.

NOTE:

 If you purchased an RBP product from an unauthorized reseller, the unauthorized 

reseller your warranty may or may not be honored. It is strongly recommended that you 
purchase RBP products from an RBP Authorized Resellers. To view dealers currently 
authorized to sell Rolling Big Power products, visit our website to see a complete list.

During the 5-year warranty period, RBP provides free replacement for any manufacturer’s 
defects. RBP reserves the right to replace any individual component of the system, or the 
entire system at its sole discretion. RBP provides a limited lifetime warranty against rust on 
the running board assemblies for the original purchaser. Proof of purchase is required when 
submitting a request for warranty replacement. Within the limit of law, the interpretation of 
warranty policy solely belongs to RBP.

RBP STEALTH POWER WARRANTY

Summary of Contents for Stealth Power RBP-510-SP

















Reviews: