R A Z O R B A C K O F F R O A D . C O M
8
Failure to follow the safety guidelines listed may result in voiding any applicable warranty, serious bodily injury, or death.
It is very important that you properly fill out your product registration form at
razorbackoffroad.com/product-registration/
to register your equipment. By submitting
the information within 15 days of your purchase, your warranty will be validated, ensuring that your equipment will be protected subject to the terms and conditions set
out herein. In the event we need to contact you concerning your registered equipment, Product Updates, Service Bulletins, or Product Recalls, the information you have
provided on the product registration form will ensure your immediate notification. Do your part and let us help you by filling out your product registration form.
Place the Lower Panel Assembly
Place the Main Panel
- From the rear, place the Lower Panel Assembly by sliding
it up in to place
- The two inner R.O.P.S. seat belt mounts will fit in to the
Lower Panel Tray
See Fig. 2-1 and Fig. 2-2
- The Main Panel can now be put in to place
- The lower mounting holes will go through the mounting
holes of the Lower Panel Assembly and the R.O.P.S. seat
belt mounting holes
-Use the provided hardware
(4) - 3/8” X 1” Hex Flange Bolt
(4) - 3/8” Nylock Flange Nut
See Fig. 3-1 and Fig. 3-2
Fig.2-1
Fig.2-2
Fig.3-1
Fig.3-2
