15
MORE PAD INDOOR
6.2 APPLICATION DETAILS
INTERFERENCE MANAGEMENT
he PAD INDOOR is a semiconductor. As the
power conducting element is missing, it can be
interrupted at will in the event of interference
with fixed elements such as light centres, socket
boxes, etc.
Only preserve the integrity of the lateral electrical
conductors embedded in the technopolymer.
6.1 LEGISLATIVE INFORMATION
In the case of renovation or energy refurbishment, it is possible to derogate from the minimum internal living space
height of 10 cm.
This possibility is of fundamental importance when it is necessary to insert a radiant floor or ceiling
system inside an existing building.
Italian Ministerial Decree 26.06.2015 - Annex 1, art. 2.3.4
In existing buildings that have undergone major renovations or energy redevelopment as defined in Article 2,
paragraph 1, letters l-vicies ter) and l-vicies quater) of the Italian legislative decree, with the specifications set out in
paragraphs 1.3 and 1.4 of this Annex, in the case of the installation of heating systems equipped with radiant floor or
ceiling panels and in the case of insulation from the inside, the minimum heights of the living quarters provided for in
the first and second paragraphs of Italian Ministerial Decree of 5 July 1975
may be derogated from, up to a maximum
of 10 centimetres.
However, in mountain municipalities above 1,000 metres above sea level, the minimum height of habitable rooms
may be reduced to 2.55 metres, taking into account local climatic conditions and the local building type
Specifically, the energy requalification activities of a building fall within the normal activities of routine or extraordinary
maintenance as stated in
Italian Legislative Decree 192.2005 - art. 2 definitions
l-vicies ter) “energy requalification of a building”
an existing building undergoes energy requalification when the work,
however named, including but not limited to: routine maintenance, renovation and conservative restoration, falls into
types other than those indicated in letter l-vicies quater); ( * )
(*) the different types concern so-called “major renovation” with work being performed on a surface area 25% larger
than the building envelope
