CLEANING AND REPLACING EAR CUSHIONS
Over time, an ear cushion may lose its elasticity. If this happens and you notice a
drop in performance, congratulations…you have good ears! You also might want to
replace the cushions to get back to the earphones original performance level. A few
other suggestions are:
1. Remove the ear cushion from the earphone (instructions below). If using the
Comply™ Foam Tip, please discard and replace with new. If using a silicone cushion,
wash with mild soap and dry thoroughly.
2. Clean the earphone nozzle with a damp soft cloth or an antiseptic cloth, then dry
thoroughly.
3. Be sure that there is no earwax (come on now, it might be gross but we all have
it) or other object plugging the nozzle preventing sound from coming through.
REMOVING/CHANGING EAR CUSHIONS
Grasp the body of the earphone and gently twist and pull the tip to remove it.
DO NOT hold or pull on cable while removing tip, see Figure 4. This will bring you bad
ju ju (and potentially a broken earphone). Replace by sliding
the back end of the cushion nozzle onto the earphone
stem and push on to the stem until it slides into place.
For Comply™ Foam Tips, visit www.complyfoam.com to
purchase new tips. Recommended replacement is after 3
months of regular use.
Figure 4
