background image

EP-SB Bluetooth Stereo Earphones 

User’s Manual

There are three simple rules when using earphones. One, keep the volume 

at a moderate level. If you must turn it up, please do so for short periods 

of time. Two, if your ears begin to hurt, it’s probably because it’s too loud, 

so turn it down. Three, use your head. Be smart about how you use your 

earphones in relation to the volume level.
There are a few other safety recommendations that our lawyers want you to 

consider:
1.  When your ears are exposed to high volume levels (greater than 85dB) 

for over an hour, you may be permanently damaging your hearing. 

Please use discretion regarding the volume you choose.

2.  Before you plug the earphones into your device, be sure the device’s 

volume is turned down, then gradually increase to a comfortable level. 

Not only will this save you from the shock of a lot of volume all at 

once, it also saves your earphones from a rush from zero output to  

high output.

3.  We never recommend using your earphones when a failure to hear your 

surroundings could be dangerous, such as while driving, biking, walking 

or jogging where traffic is present and accidents could occur. If you 

do these activities with earphones, do not fully insert the earphones 

into your ear and keep the volume low so you can hear the surrounding 

ambient noise.

4.  In rare instances, an ear tip may come off in the ear canal when remov-

ing the earphone. If this should occur and the ear tip cannot easily be 

removed, it is recommended that you promptly contact an audiologist 

or other medical professional. A professional can use blunt tweezers to 

safely remove the ear tip.

IMPORTANT SAFETY INFORMATION

Summary of Contents for EP-SB





















Reviews: