RBH Sound EP-SB, User Manual

Page: 14 / 20

EP-SB Bluetooth Stereo Earphones 11 User’s Manual
BASIC OPERATIONS
Function Status of Earphones Operation Prompt Tones
Cancel a call Calling Press once One short tone
Answer a call Incoming call ringing Press once Two rising tones
Reject a call Incoming call ringing
Press and hold
about two seconds
and release Two falling tones
End a call During a call Press once One short tone
Volume up During a call Press button
Volume down During a call Press button
Transfer conversation
to mobile phone During a call
Press and hold
about two seconds One short tone
Transfer conversation
to earphones During a call
Press and hold
about two seconds One short tone
Microphone mute During a call
Press and hold
about two seconds Two falling tones
Cancel mute
During a call (micro-
phone mute)
Press and hold
about two seconds Two rising tones
Voice dial
Standby mode (con-
nected to device)
Press and button
simultaneously One short tone
Redial the last number
Standby mode
(connected to device) Double click button One short tone
WARNING:
Excessive sound pressure levels from earphones may cause hearing loss.
NOTE:
Not all mobile phones support all the functions listed above. Functions and prompt tones may vary
depending on the mobile phone in use. Please refer to your mobile phone’s user manual for Bluetooth
instructions and operations. When the volume is adjusted to maximum or minimum, you will hear one prompt
tone. When in the microphone mute mode, you will hear two tones continuously every 10 seconds. When pressing
the answer button on some mobile phones, the call will be transferred to the mobile phone. You can switch the
call to the earphones by using the conversation switch button or through operating function on the mobile
phone. Please refer to your mobile phone’s user manual for further information.