LIF200 User Manual
10
If you want to keep the connection always on between LIF-200 and your ISP, then set the value of item
„Close Connection When Idle Time Over‟ to 0, otherwise, when the on line idle time exceeds the setting
value, the LIF-200 will terminate this PPPoE connection.
If your ISP can provide you with a fixed IP address when the PPPoE connection established each time,
you can select „PPPoE with Fixed IP Address‟
as ENABLE and enter the IP address given to you from
your ISP.
3.4.
Change Password
3.4.1. Changing User Name and Password
1)
On the left side of the screen under Management select Device Admin and open the Device
Administration Setting screen.
2)
Beside Administrator Password type in a new user name and password (verify the password by
entering it in both boxes).
3)
Click apply and accept the change by re-logging in with the new user name and password.
