RBH Access Technologies Integra32, Hardware Manual

Page: 5 / 64

Chapter 1
Introducing Integra32
RBH Access Technologies Inc. Integra32
™
Hardware Guide
1
C h a p t e r 1
I n t r o d u c i n g I n t e g r a 3 2
™
The
Integra32
™
system from RBH Access Technologies Inc. represents the latest in
access technology specifically designed for smaller applications. Its intuitive graphical
interface allows users to take advantage of the power of the
Integra32
™
with a minimal
amount of training.
The IRC-2000 Intelligent Field Panels utilize flash firmware for easy upgrades. The
IRC-2000 panel uses fully distributed intelligence for off-line operations. In addition to
supporting two card readers, each IRC-2000 Intelligent Field Panel also has eight fully
supervised alarm inputs along with eight outputs ( four dry contact outputs and four open
collector outputs ). The IRC2000‟s memory has been increased to now hold 5,000 cards
and can be further extended to hold 8,000 cards.
An alternate panel the URC-2000 can be used along with or instead of the original IRC-
2000 . This panel also uses fully distributed intelligence for off-line operations. In
addition to supporting two card readers, each URC-2000 panel has four fully supervised
alarm inputs and four outputs as well as a 3,000 card capacity. Communication is handle
through an RS485 port.
The PC is used for data entry, setting up the database, and monitoring activity on the
system. Once the database is downloaded to the controllers, the PC is not required for
system operation. Should the PC be powered down, the controller will perform all
access and other control functions (but of course not Global functions), including
logging history events. When the connection is restored, the log will then be reported to
the PC.
Up to thirty-two panels can be connected together, for a maximum capacity of sixty-four
doors. Connect the PC to the first control directly via RS232 or by an IP address (
using
an existing Ethernet ). Additional controls can be connected to the first control with
RS485 ( maximum total wiring distance is four thousand feet ) to a maximum of sixteen
panels per connection ( or network ).
Interfacing with intrusion alarm panels has been made possible. Connect to Bosch or
Summit panels through the
PC-100 board.
Elevator control is accomplished with a modified URC2000 panel and ELC-08 relay
boards. Four relay boards can control up to thirty-two floors for two readers.
Other features include the capacity for forty holidays, one hundred and twenty-eight time
zones, as well as handicap access by cardholder. High security and lock/unlock modes
are also supported. Each panel can have up to sixty-four input/output links, and the
system is capable of holding two hundred and fifty-five pre-programmed operator
commands. Both local and timed Antipassback are also supported.