use the supplied hinges for the ailerons they are easy and do perform very well, but do pin them with
needles and ca
Placet he wing tot he fuselage with the supplied spruce wing joiners, use slow glue, you can do a bit of
alligning here
Choose your retracts and open up the bottom sheeting for taking the retracts and wheels .use the
drawing as reference, you can use the cutout of the wing for retract doors, also the small opening,
strengthen them with extra glass,make the retract door holder from the flattened brass tube and
fasten with the 2,2x6 sheet metal screws