background image

05

      

Do not leave the home appliance unattended during use or leave switched off while plugged

      into the power socket.

      

Use this home appliance only for domestic use and not professional use.

      

This home appliance is not adapted to be used by groups, mutual companies, or other situations

      however similar to professional use.

      

If possible, avoid using extension cords or power strips with this device.

      

Do not use more than one extension cord or power strip connected to each other.

      

Do not handle or use home appliances with wet hands.

      

Before cleaning the home appliance, always unplug from the socket.

      

Remove the plug from the socket when the appliance is not in use.

      

Switch off the device before removing the plug from the socket. 

      

Remove the plug from the socket by holding it firmly and not by pulling it from the cable.

      

The voltage shown on the label of the product is present until the product itself remains

      connected to the socket.

ATTENTION: RISK OF ELECTROCUTION

      

Keep away from water! Do not immerse hands in liquid to retrieve the device without removing

      

the plug from the socket. Do not use home appliances close to bins containing liquids, taps,

      sinks, bathtubs, etc.

      

Do not immerse the device into water or any other liquid. Do not wet the plug. Do not use the

      device if it is accidentally wet or even just dampened. Do not wash the home appliance with

      water.

      

If the home appliance accidentally falls into water or other liquids, with dry hands immediately

      remove the plug from the power socket. 

      

The utilization of non-original accessories might cause damages to third parties or to the user

      and compromise the functionality of the home appliance itself.

      

The utilization of the device with non-original accessories or incorrect invalidates the warranty 

      of the product.

      

An incorrect and inaccurate use may damage the device and cause damage to the user.

      

Do not hold and lift the home appliance by the cable.

      

Never twist, kink or wrap the cord around the appliance as this may cause the cord insulation

      to weaken and split, particularly where it enters the unit.

      

Avoid the home appliance's electric cable from contacting with sharp rough edges.

      

Absolutely do not use the home appliance if It is damaged, the cable or the plug is damaged,

      

the unit has fallen or gotten wet, or submerged in water.  In these cases, it is necessary to

      contact customer support for further instructions.

Summary of Contents for PM220A

























Reviews: