09
Solutions
Causes
Problems
- Re-put the jug on the motor unit
- Check the power cord
- After choose the function, touch “ON/OFF” again
- Add water to the corresponding water level
- Unplugged the power, then repower and
operate according to the manual
- Check the power cord ensure it had been
plugged in
- Re-lock the lid correctly in place
- Add water to the correct level
- Put the ingredients correctly
- Choose the corresponding function
- Put the ingredients correctly
- Stop half an hour or contact After-sale service
department
- Clean the jug completely befor next time use
the appliance
- Put the ingredients correctly
- Choose the corresponding function
- Ventilate and eliminate naturally
- Reduce the ingredients
- It’s normal that whistle occasionally
- Pitcher isn’t put on the motor unit correctly
- Power cord hadn’t plugged in
- Hadn’t touch the ON/OFF after choose funtion
- No liquid in the jug so overheating
- Alarm during the appliance working
- Power cord had not been plugged in
- Lid isn’t correctly in place
- Add too much or too little water
- Too much or to little ingredients
- Water or ingredients too much or too little
- Fuse Protect the appliance
- Pitcher haven’t clean completely before
working
- Add too much food
- Having choose corresponding function
- Product is in break-in period
- Overload ingredients
- Product is in break-in period
LED light is off
LED light is on, but
appliance not work
Panel no respond
Ingedients can’t be
broken
Ingredients
undercooked
Ingredients sticks
to the bottom
Peculiar smell
Abnormal whistle
Malfunction
Code
Description
Solution
- Contact [email protected]
- Relock the lid on the pitcher or remove and
re-seat the pitcher on the motor unit in place.
- Clean the pitcher, power off and re-working
after half an hour, if still unresolved, contact
[email protected]
- Contact [email protected]
- he temperature sensor short-circuit
- Lid or pitcher isn’t correctly in place
- The temperature is too high
- The temperature is too low
- The temperature sensor open-circuit
Toubleshooting
display E1
display E2
display E3
display E4
display E5
