A
B
How to Ride
Do not activate the thumb throttle unless you are on the UB1 and in a safe, outdoor environment suitable for riding.
Put kickstand up.
Press the power button
(A)
, the LEDs will light up.
Get on the scooter and place both hands on the handlebars then press down on the thumb throttle
(B)
.
Note:
Keep both feet on the foot pegs when unit is in motion.
How to Stop
To stop, release the throttle and apply the hand brake until the product comes to a complete stop. Razor recommends
that you practice applying the brake options at various speeds and in an open area free from obstructions before
riding your scooter around others.
Note:
When coming to a complete stop, place both feet on the ground to balance the unit.
Note:
As an additional safety
feature, the scooter is designed to
cut power to the motor when the
brake is applied.
Note:
Practice riding only in wide
open areas clear from curbs,
parking blocks and other obstacles.
Impacting the wheels against
any hard surface can damage the
wheels. Wheels are not covered
under the limited warranty.
Need Help?
Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at
www.razor.com
. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer
Service contact information is listed at the back of this manual.
8
USAGE
