background image

Need Help?

 Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information 

at 

www.razor.com

. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service 

contact information is listed at the back of this manual.

7

While riding, release the remote 

lever and it will return to the 

“NEUTRAL” position. The product 

will slow to a stop with  

motor resistance.

To slow more rapidly to a stop, 

move the remote lever down to the 

“STOP” position and hold. This will 

engage dynamic motor braking  

and the product will slow down 

more quickly. 

Note:

 Practice riding only in wide 

open areas clear from curbs, 

parking blocks and other obstacles. 

Impacting the wheels against 

any hard surface can damage the 

wheels. Wheels are not covered 

under the limited warranty.

USAGE

Note: RazorX Longboard Electric 

Skateboard must be moving at 

least 3 mph (5 km/h), with lever 

on remote in GO position, for 

motor to engage.

Note:

 As an additional safety 

feature, the RazorX Longboard 

Electric Skateboard is designed to 

cut power to the motor when the 

lever on the remote is in the “STOP” 

or neutral position.

Note:

 Motor will re-engage, 

(without having to kick start), if 

the remote is in the “GO” position 

before

 RazorX Longboard Electric 

Skateboard has slowed down to 

under 3 mph (5 km/h). 

 How to Ride

Do not activate the remote unless you are on the RazorX Longboard Electric Skateboard and in a safe, outdoor 

environment suitable for riding.
Turn power button to the “ON” position for both the RazorX Longboard Electric Skateboard and the remote.
Place one foot on the front of deck and with the other foot, push (kick start) RazorX Longboard Electric Skateboard 

while

 holding the lever on the remote in the “GO” position.  Place other foot on rear of deck once motor has engaged.

 How to Stop

The RazorX Longboard Electric Skateboard, like RipStiks or skateboards does not have a conventional “brake”, however 

the RazorX Longboard Electric Skateboard can coast to a stop or can use “dynamic motor braking” to slow more quickly.

Note: 

Stepping off the product also works to stop. Releasing the remote lever will cut power to the motor.

Summary of Contents for RAZORX LONGBOARD

















Reviews: