manualshive.com logo in svg

Razor POCKET MOD BELLEZZA, Owner'S Manual

Share
Download
Razor POCKET MOD BELLEZZA Owner'S Manual Download Page 10

9

 Chain and Rear Wheel Replacement 

Tools Required:

 Phillips Screwdriver, (2) 15 mm Wrenches.

1

 Loosen the five (5) Phillips 

screws on the chain guard. Remove 

chain guard.

2 

Using two (2) 15 mm wrenches, 

loosen the locknuts. Slide the wheel 

forward to loosen the chain and 

remove the wheel. 

Note:

 Hardware sequence on 

the right.

3

 Install the new chain or wheel 

by slipping the chain around the 

axle. Slide the wheel forward and 

maneuver the chain onto the  

rear sprocket, motor sprocket  

and chain tensioner. 

5

 

Reattach the chain guard.  

4

 Verify chain is properly 

installed on each sprocket and 

chain tensioner is correctly 

positioned at the bottom of 

the chain.

*Note: The arrangement of the 

hardware sequence:

Left Side (Brake)

21-1 15 mm Locknut

21-2 Lock Washer

Frame

21-3 Spacer

Right Side (Throttle)

21-1 15 mm Locknut

21-2 Lock Washer

Frame

21-3 Spacer

REPAIR AND MAINTENANCE

21-1

21-1

21-2

21-2

21-3

21-3

Summary of Contents for POCKET MOD BELLEZZA

















Reviews:

No comments

Brands by name

Popular brands

Load more brands