ASSEMBLY AND SET-UP
Calibration Confirmation
Note:
Your Hovertrax Prizma should have been calibrated at the factory.
Calibrating Hovertrax Prizma
1
Place Hovertrax Prizma on a level surface.
1
Place Hovertrax Prizma on a level surface.
3
While keeping the product level, turn power
ON
and
HOLD
until product
beeps and lights flash (approximately 15-20 seconds).
5
Calibration complete.
Note:
Once the product has been calibrated, no matter what position (angle)
the platforms are in when it is turned off, the platforms will automatically
self-balance themselves back to the calibrated position when product is
turned on.
2
Turn power
ON
. If product remains level or adjusts to become level,
calibration has been confirmed. No further steps are needed.
If product begins to roll or does not move into a level orientation, see
Calibrating Hovertrax Prizma.
2
Manually adjust the platforms so they are level to the ground.
4
Turn power back
OFF
.
5
