background image

HOW TO OPERATE

9

HOW TO GET ON

Once you have charged the battery (see page 6 for charging information):

1. 

Power On:

 Set the Hovertrax Prizma on the ground and turn the power on. The battery/power mode indicator 

will show either one or two lights to indicate mode (see page 8 for instructions on switching modes). Do 

NOT

 

proceed to step two (2) until all lights on the indicator light up.

2. 

First Foot:

 While standing behind the Hovertrax Prizma, put one foot on a foot platform, closer to the wheel 

than to the center. Use that foot to activate the foot platform by bringing that foot platform to a balanced, level 

position.

3. 

Confirm Activation:

 Confirm the first foot platform is activated. Move your foot back and forth and feel 

the response from the product. Play with this single foot platform until you are comfortable keeping the foot 

platform motion minimal.

4. 

Step Up:

 With the first foot platform stable and still, step up on the second foot platform with your second foot. 

Do this away from furniture and other large objects. Don’t use a fixed object to brace or lift yourself – Keep your 

weight evenly distributed between the two foot platforms. If you are uncomfortable; step back off and repeat 

from step 2. Try to stand on the Hovertrax Prizma without moving.

HOW TO RIDE:

5. 

Stand in Place:

 Hovertrax Prizma is unique among two-wheeled items in that the active stabilization it 

provides allows you to stand in place. A scooter or bicycle may balance more easily when it moves, but a 

Hovertrax Prizma can balance even while stationary.

6. 

Move Forward:

 To move forward, press down gradually with your feet on the fronts of both foot platforms. Do 

not lunge forward or lean excessively, as you may lose your balance.

7. 

Slow Down:

 To slow down or stop, apply pressure to the rear edges of the foot platforms by pushing down 

with your heels. Leaning back somewhat may be useful but remember your feet are giving the instructions! If 

you continue pushing the rear edges with your heels, you will be able to travel backwards.

8. 

Turn:

 To turn left, slightly push your right foot down on the front of the right foot platform; to turn right, 

push down on the front of the left foot platform. This idea is to make one wheel turn a little bit faster than 

the other wheel.

9. 

Rotate in Place:

 To rotate in place, push down on the front of one foot platform while pushing down with equal 

force on the rear of the other foot platform.

HOVERTRAX PRIZMA SPEED CONTROL

10. 

Not too fast:

 The max speed of this product is 9 mph (14.5 km/h), however the recommended top operating 

speed is approximately 6 mph (10 km/h). Speed may be affected by rider weight, surface conditions, battery 

charge, etc. The Hovertrax Prizma is capable of exceeding the normal operating speed for short periods, which 

is designed to permit the wheels to react and “re-balance” the product by helping level itself. Do not attempt to 

“force” the Hovertrax Prizma into continuous operation at “re-balance” speeds, as control will be more difficult 

and falls more likely.

HOW TO GET OFF:

11. 

Slow down and stop

12. 

Step to the back

13. 

Power down

NOTE: If Hovertrax Prizma is left on for more than 5 minutes, it will automatically turn off and beep.
PRODUCT WARNING SIGNALS

The Hovertrax Prizma has several built in protection features, which include:

• 

Self-leveling function:

 If the product is not level when powered on it will slowly rotate until it is level. 

Always wait to mount until it has completely stopped self-leveling and all lights on the battery power mode 

indicator are lit.

• 

Training Mode:

 This product can be set to training mode to operate at a slower speed (see page 8 for 

instructions). Do not operate in normal mode until you are completely comfortable riding in training mode.

• 

Low or charging battery:

 The battery/power mode indicator light (orange) will indicate insufficient charge for 

operation by flashing and the product will beep.

• 

Excessive angle shutoff:

 At excessively steep foot platform angles, the product will stop powered operation.

Riding Tip:

 Before your very first 

ride, expect to spend up to ten 

minutes in this stage of learning 

how to stand comfortably on the 

Hovertrax Prizma. 

Riding Tip:

 Hovertrax Prizma is 

best ridden at speeds similar to a 

brisk walk, not faster.

Self-balancing Function:

 If 

product is not level when powered 

on it will slowly rotate until it is 

level. Always wait to mount until it 

has completely stopped self-leveling 

and all lights on the battery/power 

mode indicator are lit.

Note:

 All lights flashing notes a 

leveling error. Do not ride until 

flashing stops.

Riding Tip:

 Your practice on 

Hovertrax Prizma should be to keep 

the platform in place and get a feel 

for the motions that are generated 

from small changes in your fore/aft 

foot pressure.

Summary of Contents for HOVERTRAX PRIZMA

















Reviews:

Related manuals for HOVERTRAX PRIZMA