background image

6

CHARGING THE BATTERY

Charger

Note:

 Charger design may vary from 

one shown

2

 

Note:

 Make sure power switch is 

in the 

OFF

 position. Plug the charger 

into the charger port. The light on 

the charger should turn red during 

charging. The light will turn green 

again when charging is complete.

Plug the charger plug into wall 

outlet. The light on the charger 

should be green.

Note:

 If green light (LED) does not 

turn on, try a different outlet.

Your electric scooter may not have a fully charged battery; therefore you must charge the battery prior 

to use.

• Initial charge time: 12 hours.
• Recharge time: up to 12 hours, even if the light  

turns green. Recommended maximum charging time  

is 24 hours.

• Always charge the battery immediately after riding.
• Fully charge battery before storing for extended 

periods of time.

• Unplug charger from the wall outlet when not in use.
• Failure to recharge battery periodically may result in a 

battery that will not accept a charge.

• Make sure the power is turned OFF when product 

is not in use. If the ON/OFF switch is left on for an 

extended period of time, the battery may reach a 

stage at which it will no longer hold a charge.

• To ensure long battery life, never store the product in 

freezing or below freezing temperatures! Freezing will 

permanently damage the battery.

• Run time: Up to 40 minutes of continuous ride time. 

Run time may vary depending on riding conditions, 

rider weight, climate, and/or proper maintenance.

• Constant starting and stopping may shorten ride time.
• Battery life can vary depending on proper 

maintenance and usage of the product.

Note:

 If your charger does not look 

like the one illustrated, your unit 

has been supplied with an 

alternative charger. The 

specifications and charging 

procedure would not change.

WARNING:

 Use ONLY  

with the recommended charger. 

Batteries are only to be charged 

under adult supervision. The charger 

is not a toy. Always disconnect the 

charger before wiping down and/or 

cleaning the electric scooter with a 

damp cloth.
The charger supplied with the 

electric scooter should be regularly 

examined for damage to the cord, 

plug, enclosure and other parts. 

In the event of such damage, 

the electric scooter must not be 

charged until it has been repaired or 

replaced.
Chargers have built-in overcharge 

protection to prevent battery from 

being overcharged.

Be sure to properly align the 

groove on the charger input plug 

with the corresponding socket 

on the case; otherwise, no 

charging action will occur.
Note:

 If the charger gets warm 

during regular use, this is a normal 

response and is no cause for 

concern. If your charger does not get 

warm during use, it does not mean 

that it is not working properly.
Wall outlet - Green (stand by) 

Wall outlet and unit - Red (charging) 

Wall outlet and unit - Green 

(charged)

Note:

 Continue charging unit even if 

light turns green prior to 12 hours.

WARNING:

 Battery charge 

can deplete over time. Periodically 

recharge battery when not in use.

6

Summary of Contents for EcoSmart Metro

















Reviews: