Need Help?
Visit our website at
www.razor.com
or call toll-free at
866-467-2967
Monday - Friday 8:00am - 5:00pm Pacific Time.
1
WARNING
Step 1
Step 2
Figure 1
Figure 2
Tools Required:
(
Not included
)
A. Phillips head screwdriver
B. Flat head screwdriver
C. 5mm Allen wrench
D. 3mm Allen wrench
E. 10mm open wrench
CAUTION:
To avoid potential shock or other injury, turn power switch OFF and
disconnect charger before removing or installing the batteries. Failure to follow these steps
in the correct order may cause irreparable damage.
Turn the unit off, and using a 5mm Allen wrench
and a 10mm open wrench remove the four bolts
on your deck, the bolts at the front are held by
two 10mm nuts.
Disconnect the batteries and remove from the
tray to get better access to the throttle.
ECO SMART
THROTTLE REPLACEMENT PROCEDURES
