Razor Dirt Rocket MX125 Owner'S Manual Download Page 10

Page: 10 / 16

HEADLINE

Need Help?

Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information

www.razor.com

. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer

Service contact information is listed at the back of this manual.

REPAIR AND MAINTENANCE

Need Help?

Visit our website for replacement parts, product support, a list of authorized service centers in the US and customer service contact information

www.razor.com

. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer

Service contact information is listed at the back of this manual.

Front Wheel Replacement

Tools Required:

Phillips Screwdriver and 14 mm Wrench

Remove front wheel and install

replacement wheel.

Replace the safety washers and

tighten the locknuts on both sides of

the front axle using a 14 mm wrench.

Remove the locknuts on both

sides of the front axle using a

14 mm wrench and remove the

safety washers.

Summary of Contents for Dirt Rocket MX125

















Search results

Summary of Contents for Dirt Rocket MX125

Reviews:

Related manuals for Dirt Rocket MX125

Brands by name

Popular brands

Razor Dirt Rocket MX125, Owner'S Manual

Search results

Summary of Contents for Dirt Rocket MX125

Reviews:

Related manuals for Dirt Rocket MX125

Brands by name

Popular brands