Need help? Call 1.800.694.0013
Do not return to place of purchase.
Replacement Parts
1.800.694.0013
15
For more information, please visit BlueRhino .com/
RazorFAQ .
Tools needed for seasoning:
• Metal scraper or metal spatula
• Cooking oil, such as vegetable oil or extra virgin
olive oil
• Paper towels
• BBQ stone or steel wool
W
CAUTION: Do NOT use corn oil as it
contains a high level of sugar, which
can carmelize and burn onto the
surface.
First Use
1 . Light griddle per “Lighting” section .
2 . Keep burners on (HIGH) for 15 minutes .
3 . Turn griddle off per “Turning Off” section .
4 . Allow griddle to cool, but still be slightly warm .
5 . Wipe off griddle surface, inner and outer walls
with paper towels until clean .
Note: While drying you may notice the towel may
have some discoloration . This is normal .
6 . Apply cooking oil onto griddle surface, inner and
outer walls and evenly coat with rolled up paper
towels .
7 . Repeat this process at least twice .
After Each Use
1 . Turn griddle off per “Turning Off” section .
2 . While the griddle is still warm, gently scrape off
all food residue with a scraper .
3 . Wipe down griddle surface, inner and outer walls with a towel or paper towels .
4 . For stubborn food residue:
a . Light griddle per “Lighting” section .
b . Apply cooking oil onto griddle surface .
c . Allow oil to “boil” food residue off .
d . Repeat steps 1 through 3 .
e . If necessary, use a BBQ stone and scrub the food residue off .
f . Continue with “Seasoning Griddle” instructions .
5 . Wipe off griddle surface, inner and outer walls with paper towels until clean .
Note: While drying you may notice the towel has some discoloration . This is normal .
6 . Apply finishing oil onto griddle surface, inner and outer walls and evenly coat with rolled
up paper towels .
7 . Light griddle per “Lighting” section .
8 . Keep burners on (HIGH) for 15 minutes or until cooking oil starts to smoke .
9 . Turn griddle off per “Turning Off” section .
10 . Repeat steps 6-9 a minumum of 2 additional times .
11 . Following “Before Storing” section .
Refurbish the Griddle Surface
1 . If griddle is off, light per “Lighting” section for 10 minutes . Then turn griddle off per
“Turning Off” section .
2 . If griddle is on, turn griddle off per “Turning Off” section .
3 . While the griddle is still warm, use a scraper or metal spatula to remove as much rust and
food residue as you can from the griddle surface, inner and outer walls .
4 . Apply a liberal amount of cooking oil onto the griddle surface .
5 . Using a BBQ stone, scrub the griddle surface . Apply additional cooking oil as need .
6 . Wipe off griddle surface, inner and outer walls with paper towels .
7 . Repeat steps 3-5 until paper towels no longer show any rust .
8 . Apply cooking oil onto griddle surface, inner and outer walls and evenly coat with rolled up
paper towels .
9 . Light griddle per “Lighting” section .
10 . Keep burners on(HIGH) for 15 minutes or until cooking oil starts to smoke .
11 . Turn griddle off per “Turning Off” section .
12 . Repeat steps 7-10 until the surface has a nice dark color .
13 . Following “Before Storing” section .
Product Registration
For faster warranty service, please register your product immediately . To register, call
1 .800 .694 .0013 .
Replacement Parts
For replacement parts, call 1 .800 .694 .0013 .
Limited Warranty
RevoAce Inc . Limited (“manufacturer”) warrants to the original retail purchaser of this
product, and to no other person, that if this product is assembled, maintained, and operated
in accordance with the printed instructions accompanying it, then for a period of one (1) year
from the date of purchase, all parts in such product shall be free from defects in material and
workmanship . Manufacturer may require reasonable proof of your date of purchase . Therefore,
you should retain your sales slip or invoice . This Limited Warranty shall be limited to the repair
or replacement of parts, which prove defective under normal use and service and which
manufacturer shall determine in its reasonable discretion upon examination to be defective .
Before returning any parts, you should contact manufacturer’s Customer Service Department
using the contact information listed below . If manufacturer confirms, after examination, a defect
covered by this Limited Warranty in any returned part, and if manufacturer approves the claim,
manufacturer will replace such defective part without charge . If you return defective parts,
transportation charges must be prepaid by you . manufacturer will return replacement parts to
the original retail purchaser, freight or postage prepaid .
This Limited Warranty does not cover any failures or operating difficulties due to accident,
abuse, misuse, alteration, misapplication, improper installation or improper maintenance or
service by you or any third party, or failure to perform normal and routine maintenance on the
product as set out in this owner’s manual . In addition, the Limited Warranty does not cover
damage to the finish, such as scratches, dents, discoloration, rust or other weather damage,
after purchase .
This Limited Warranty is in lieu of all other express warranties . manufacturer disclaims all
warranties for products that are purchased from sellers other than authorized retailers or
distributors, including the warranty of merchantability or the warranty of fitness for a particular
purpose . MANUFACTURER ALSO DISCLAIMS ANY AND ALL IMPLIED WARRANTIES, INCLUDING
WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
A PARTICULAR PURPOSE . MANUFACTURER SHALL HAVE NO LIABILITY TO PURCHASER OR
ANY THIRD PARTY FOR ANY SPECIAL, INDIRECT, PUNITIVE, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES . manufacturer further disclaims any implied or express warranty of, and assumes no
responsibility for, defects in workmanship caused by third parties .
This Limited Warranty gives the purchaser specific legal rights; a purchaser may have other
rights depending upon where he or she lives . Some jurisdictions do not allow the exclusion or
limitation of special, incidental or consequential damages, or limitations on how long a warranty
lasts, so the above exclusion and limitations may not apply to everyone . manufacturer does not
authorize any person or company to assume for it any other obligation or liability in connection
with the sale, installation, use, removal, return, or replacement of its equipment, and no such
representations are binding on manufacturer .
RevoAce Inc . Limited
Hong Kong, China
service@revoace .com
1 .800 .694 .0013
8:00 am to 4:00 pm central time, Monday to Friday .
Cleaning and Care (continued)
Figure 11
Burner Flame Conditions
Use this chart to see if your burners
need to be cleaned .
1-2 in. /
25.4 - 50.8 mm
Normal:
Soft blue flames with yellow
tips between 1 in . - 2 in . height .
Needs cleaning:
Noisy with hard
blue flames .
Has to be replaced:
Wavy with
yellow flames .
