
2.14 H-Strap – All Models
An optional one-piece H-strap can be attached to the footrests on any
Raz model. The H-strap is recommended for individuals who require
additional positioning for the legs and feet.
To install the H-strap:
1. With the Velcro facing towards the chair, center the strap
horizontally between both footrest hanger tubes and wrap the
loop Velcro around the tubes until it engages with the hook
Velcro.
To adjust the H-Strap:
1. Disconnect the Velcro from the back of the H-strap and adjust
to sling or tighten the H-strap to suit the users’ needs.
2. Press firmly on the Velcro to secure the H-strap prior to use.
IMPORTANT !
ANY ADJUSTMENTS TO THE CHAIR’S STRAPS SHOULD BE PERFORMED WITH EXTREME
CAUTION AS THE USER’S SAFETY IS DEPENDENT ON SECURE POSITIONING STRAPS.
2.15 Fasteners – All Models
All fasteners (locknuts, screws, and washers) should be checked
periodically to ensure that they are snug and do not pose risk to the
user. All nuts used on your Raz Shower Chair are locknuts or are used
in conjunction with a lock washer. Locknuts that are removed for any
reason should be replaced rather than re-used. The fasteners should
be checked periodically to ensure a secure fit.
IMPORTANT !
A QUALIFIED RAZ DEALER SHOULD BE CONTACTED TO CHECK ALL FASTENERS, CASTER
AND WHEEL LOCKS, HARDWARE, AND ALL OTHER MOVING COMPONENTS AT LEAST ONCE
PER YEAR.
Raz AP/SP User’s Manual
20080509
13