Rayvision RVH3004, User Manual

Page: 57 / 123

Compact 4Ch H.264 Network DVR-MU.Ver1.1
45
3.9.3.2 IP Address Setup
The IP address acts as a locator or an identification number to enable a device on a
TCP/IP network to locate other devices and interact with them. Certain parameters
need to be set through IP Address Setup to ensure proper network communication.
NETWORK SETUP
⌧
Network Enable [
√
Enable]
IP Address Setup
IP Type [DHCP]
IP Address [ 0. 0. 0. 0]
Gateway [ 0. 0. 0. 0]
Subnet Mask [ 0. 0. 0. 0]
MAC Address [00:B2:95:DF:96:B7]
PPPoE Account ID [Not Definition]
PPPoE Password [Not Definition]
Management/Motoring Setup
Server Setup
IP Type
There are two options for IP type: Static IP address and Dynamic IP address (DHCP
and PPPoE).
•
Static IP Address: User must manually define a static IP address. Contact the
network administrator for this information.
•
DHCP: System gets the IP address from the router or DHCP server. Contact the
network administrator for this information.
•
PPPoE: The Point-to-Point Protocol over Ethernet (PPPoE) is used mainly with
DSL services where individual users connect to the DSL modem over Ethernet
and in plain Metro Ethernet networks.
Please input the PPPoE Account ID and Password provided by the ISP.
(Note: Account ID maximum in 24 characters; Password maximum in 16
characters)
•
GATEWAY: Define gateway IP address. Contact the network administrator for this
information.
•
SUBNET MASK: A sub network, or subnet, is a logically visible, distinctly
addressed part of a single Internet Protocol network. Contact the network
administrator for this information.
•
MAC Address: MAC address is a unique identifier assigned to most network
adapters or network interface cards (NICs) by the manufacturer for identification. It
has been set at dedicated address even reset the DVR.