Rayvision 8-Channel User Manual Download Page 89

Page: 89 / 147

Compact 4Ch H.264 Network DVR-MU.Ver1.1

Load Settings from USB

LOAD SETTINGS FROM USB



USB Disk [General Flash Disk]

Free Capacity                                             [905MB]
Total Capacity                                          [1005MB]
Read File                             [Env2010-07-14_0503]

[

Load File] [

File Select]

This tool can help you load the system environment configuration from the USB device.

Click [

File select] to select the file you would like to load.

LOAD SETTINGS FROM USB-FILE SELECT





Env2010-07-14_0531.env (Generic)



Env2010-07-11_0526.env (Generic)



Env2010-07-09_0525.env (Generic)



Env2010-07-08_0504.env (Generic)

Click [

Load File] to load the selected file from USB device. It will show the following

message:

LOAD SETTINGS FROM USB



File ‘Env2010-07-14_0503.env’ Loaded.

System will restart…

Restore Default Setting

This command resets the system to its default settings.

UTILITY/TOOLS



Format USB Drive



Firmware Update



Environment Setting

Save Setting to USB



Load Setting from USB



Restore Default Setting

Summary of Contents for 8-Channel




















































































































































Search results

Summary of Contents for 8-Channel

Reviews:

Brands by name

Popular brands

Rayvision 8-Channel, User Manual

Search results

Summary of Contents for 8-Channel

Reviews:

Brands by name

Popular brands