Rayvision 16-Channel User Manual Download Page 53

Page: 53 / 147

Compact 4Ch H.264 Network DVR-MU.Ver1.1

3.6 Detector Setup

Detector Setup configures the alarm and motion mode for each or all channels.

DETECTOR SETUP



Channel Number

Alarm Setup

Blind Detect Alarm Mode [Sensitivity OFF]
Blind Detect Alarm Mode [

Buzzer-Short]

Video Loss Mode [X Disable]
Video Loss Alarm Mode [

Buzzer-Short]

Motion Setup

Sensor Setup

3.6.1 Channel Number

To sets the detection mode by each or all channels.

Select the icon “

” to setup the alarm and motion mode of all channels at one time.

Select the icon “

”, “

---------” to setup for the each channel.

3.6.2 Alarm Setup

Alarm Setup is accessed to configure the alarm mode of each channel, individually, or
for all channels, simultaneously.

DETECTOR SETUP



Channel Number

Alarm Setup

Blind Detect Alarm Mode [Sensitivity OFF]
Blind Detect Alarm Mode [

Buzzer-Short]

Video Loss Mode [X Disable]
Video Loss Alarm Mode [

Buzzer- Short]

Motion Setup

Sensor Setup

3.6.2.1 Blind Detect Mode

The Blind Detect Mode detects any abnormal video input when the security camera is
situated in covered or shady areas or in areas with direct exposure to intense light.

Choose any of the following settings to adjust the sensitivity of blind detection:

Summary of Contents for 16-Channel















































































































































Search results

Summary of Contents for 16-Channel

Reviews:

Brands by name

Popular brands

Rayvision 16-Channel, User Manual

Search results

Summary of Contents for 16-Channel

Reviews:

Brands by name

Popular brands