Rayvision 16-Channel User Manual Download Page 144

Page: 144 / 147

8.1 iPhone Environment

Please setup your iPhone environment as following condition:

Upgrade the iPhone OS version up to iOS4.0 or above.

Check the iOS version from iPhone [Settings]

→

[General]

→

[About]

→

[Version]

ii.

If you need to upgrade the iOS, please update from iPhone [App Store]

→

[Update] to find out the update version.

8.2 Install SecuViewer

SecuViewer is the free software available for the DVR user to connect to the DVR for
remote monitoring through the iPhone.

Please search the SecuViewer on
iPhone “App Store”.

Enter “SecuViewer” to search the
SecuViewer software on the iPhone APP
Store search page.

Touch the icon “Free” that the icon will
change to “Install”. You could install the
software through one more touch.

Summary of Contents for 16-Channel















































































































































Search results

Summary of Contents for 16-Channel

Reviews:

Brands by name

Popular brands

Rayvision 16-Channel, User Manual

Search results

Summary of Contents for 16-Channel

Reviews:

Brands by name

Popular brands