V1.0
RayTools AG © Copyright
www.raytools.ch
5 | 13
2.3 Water & Gas Circuit Connection
2.3.1 Water Circuit
Figure 2-1 indicates a suggested connection method.
Fig. 2-1 Water Circuit Connection
Use a water tube (Ф6mm) to make a loop by connecting interface 2-3-4-5-6-7.
Interface 1: water inlet; Interface 8: water outlet
(connected with water cooling machine)
Water cooling specifications
Minimum flow speed
1.8L/min (0.48gpm)
Water pressure
＞
0.4Mpa
Entry temperature
≥ room temperature
＞
dew point
Hardness
(relative to CaCO3)
＜
250mg/L
PH range
6 to 8 (deionized or distilled water)
Particle size allowed
＜
200
μm (
diameter)
