Raytheon STD 21 GPS, Operation Manual

Page: 80 / 119

Satellite Compass
STD 21 GPS
72
3717/110--850.DOC020002 Edition: Feb. 05, 2007
Procedure to leave “GPS Setup” with a changed configuration.
If an AU Alignment value change has been made, operate the soft key “Set” and the dis-
play “GPS Setup” is shown again with additional menu options to acknowledge the
change or to discard the setting.
Dim
up
Dim
down
GPS Setup
Serial Port #3
Serial Port #4
PU Mounting
AU Alignment
GPS
Pos.
Select
Set
Sat.
Status
Software Versions
Discard changes
Store settings
and restart system
Figure 61: Display “GPS Setup” after changes have been made in one of the submenus
To store the change, select “Store settings and restart system” with the soft key “Select”
and operate “Set”. The STD 21 GPS will restarted and, after the initialization and ac-
quisition procedure, the display “GPS Pos.” (Basic Display) is shown (see Figure 8).
Procedure to leave “GPS Setup” without a changed value.
Select “Exit” without performing a change in the submenu “AU Alignment”
(see Figure 58), the display “GPS Setup” (without additional menu) is shown
(see Figure 50) .
or
Select “Discard changes” with the soft key “Select” and operate “Set”, then the
display “GPS Setup” is shown again (see Figure 50).