2-15
2.9.2
Set Switchover Auto Heading
In case of a failure of the selected heading an automatic switch-over to the next heading
sensor can be selected. Gyro, GPS THD or magnetic compass can be selected.
GPS THD cannot be selected separately – it is included in the “to
Gyro” option.
Figure 2-10
Set Switchover Auto Heading
Pos. No.
Designation
Function
1
Back
Switches back to the previous page.
2
Set Value
Confirm the settings for auto heading.
3
Gyro Selection
Decide if an automatic switch-over to the gyro
compass/GPS THD compass is desired.
4
TMC Selection
Decide if an automatic switch-over to the magnetic
compass is desired.
1.
Open the sub-menu Auto Heading from the service page, see chapter 2.9.1.
- The sub-menu auto heading opens, see Figure 2-10.
2.
Use the Set button (Figure 2-3/11) to navigate through the options.
- The selected option is highlighted.
