NautoPilot® 5000 Series
102-890.NG001-NG003
Operator Manual
Edition: 003
99
10000001052
3 Summary of possible adjustments, parameter settings and
configurations
The table below is a summary of all adjustable settings arranged in alphabetical
order, together with a reference to the section in the Operator Manual in which the
setting is explained.
Table 17
Summary of possible Adjustments, Parameter Settings and Configurations
Parameter
Meaning
see
section
Acceleration Limit
Influence of RoT and speed. Threshold for
acceleration monitor.
2.3.5.4.1
Acceleration Monitor Influence of RoT and speed.
2.3.5.4
Counter Rudder
Controller Parameter that influences controller
performance.
1.3.3,
2.3.5.1,
2.3.5.2,
2.3.6.5
Course Trim
Alert activation caused by the difference between
set course or track course and actual heading.
2.3.6.4,
Figure
53
Drift [kn]
Drift for Dead Reckoning.
2.3.5.5
Eco/Prec
Softkey, selection between Economy mode and
Precision mode
2.3
Heading
Heading source.
2.3.6.1
Heading Monitor
Alert activation caused by the difference be-
tween gyro compass and magnet compass
2.3.6.4
man. Speed
Manual speed input.
2.3.6.2
Off Heading
Alert activation caused by the difference be-
tween set and actual heading.
2.3.6.4
Off Position Limit
Alert activation if Off Position Limit for GPS
monitoring exceeds the adjusted limit.
2.3.6.4
Para / Mem
Calling up and adjusting of parameter sets
(for non- adaptive mode only)
2.3.8
Rad/RoT
Softkey for selecting heading change under RoT
control or radius control
2.3
RoT
RoT for acceleration limit
2.3.5.4
Rudder
Controller Parameter that influences controller
performance.
1.3.2,
2.3.5.1,
2.3.5.2,
2.3.6.5
Rudder Limit
Rudder limit for the controller function
(no physical limits).
2.3.6.4
