23
Expert Mode
22
Expert Mode
Examples
Disconnect the unit from the PC and begin your
inspection.
Once the inspection has been done, transfer
data and photos to the PC. Connect the unit via
USB to the computer, while the software is run-
ning. The data transfer begins automatically
when the message “Connected” appears.
Now you can set up which data fields should be
inserted in the photos after you have taken
them. All columns you choose here will be inclu-
ded in the final photo. You can’t delete any infor-
mation from the photo itself. To open the sub-
menu simply right click into the table
With the following dialog choose and order the
columns.
Note!
The more data you insert in the photo the
more these data will hide the picture. Especially
if your working in the low resolution mode, we
recommend to choose only a few columns.
Many columns
chosen
Fewer columns
chosen
