Operation
Manual
Raytek
CM
10
6 Software
Raytek DataTemp Multidrop software allows the configuration and monitoring of CM sensor operating parameters,
such as:
z
Emissivity
z
Transmissivity
z
Averaging
z
Peak
hold
z
Valley
hold
z
Temperature scale of analog output
z
Alarm
temperature
value
z
1 point field calibration offset
z
Alarm
output
Refer to DataTemp software manual (on the software CD) for more detail.
Notes for CM sensors:
1. Use the Temperature unit in Degree C for field calibration, if in Degree F, there is no effect.
2. CM shares the alarm line with the RS232 TxD and the alarm function will be temporarily turned off and changed
to RS232 mode when connecting to the DataTemp software. After re-powering the sensor without connecting to
the DateTemp software, the alarm mode will function normally.
1.888.475.5235
