Raytech USA, Inc.
All rights reserved. No portion may be reproduced without written consent.
10
Test Connections:
+
Current = Positive Current connection
+
Channel 1 = Positive Potential (voltage) connection of Channel 1
-Channel 1 = Negative Potential (voltage) connection of Channel 1
+
Channel 2 = Positive Potential (voltage) connection of Channel 2
-Channel 2 = Negative Potential (voltage) connection of Channel 2
-Current = Negative Current connection
Ground Terminal
The ground connection is located towards the back panel of the raised portion of the faceplate.
It is spring loaded and threaded. Use the supplied ground wire to snap the spade under the
ground terminal. Do so by un-threading the green part. Or you may use a 4mm banana plug into
the top of this connector.
Vents
These vents pull in the air.
This is the exhaust vent.
*Please make sure there are no obstructions blocking these vents.
Damage to the system may occur.
