K Error Messages
Raytech instruments are designed to be precise, rugged and trouble free. In most cases, many
operators will never see any error messages.
The emergency switch is activated.
In this condition it is not possible to start a
measurement.
Exit this message screen by touching “OK”
without releasing the emergency switch.
The system will revert to a pretest or main
screen similar to the one shown:
Because the emergency switch is still
depressed, you are not able to start a new
measurement.
All other features of the system such as storing,
printing are still active.
Turn the Emergency Stop button clockwise to release.
24 In case of Interlock-Modification for extend safety circuit the same message appears. For more information see chapter 9.1.3.3
Extended Safety Circuit type on page 105.
Instruction Manual Winding Resistance Meter
Type WR100 / WR50 / WR14
Page 135 of 139
