15
11. Mechanical Details and Battery Information
Dimensions: 40 x 87 x 7.5 mm
Weight:
10g
Battery: CR2025
10. PIN Function - Security Feature
For extra security VARIO2 allows a PIN (Personal Identification
Number) to be set for each illuminator using the Remote Control
buttons.
For full details on how to set-up a PIN and the additional security
features it gives please refer to your Illuminator Instruction Guide.
VARIO2 Hybrid: PIN function not available
12. VARIO Remote Control Troubleshoot
(see Illuminator instructions for troubleshooting of illuminator)
Ensure all tests are undertaken by a qualified, trained engineer. Ensure safe
working practices are followed at all times.
Troubleshoot
- Ensure no other strong Infra-Red source is pointing at the remote
receiver which is on the bottom of the unit.
- Ensure that there is a clear line of site between the unit and remote
with no possible obstructions.
- In extreme sunlight conditions, distance between the unit and remote
may need to be reduced.
- If you are attempting to use Remote Control for a function only available
in programming mode, ensure the unit is in programming mode first
(RHS LED FLASHING AMBER) (You may need to press the status
button first to enable the LED indicators) If not in programming mode,
re-power VARIO2 illuminator. Turn power off for at least 10 seconds
and then power on.
- If the unit has a PIN set, you will need to use the PIN number to change
to programming mode. You cannot enter programming mode by power
cycling only when a PIN is set. If you don`t know the PIN number,
you will need to perform a full re-set (Please refer to the illuminator
instruction Guide).
