Raytec VARIO2 i16, Quick Start Up Manual

Page: 6 / 32

Remote Control Operation
PIN set and Manual Button Disable / Enable
Action
Required
Available
Mode
Step1 Step 2 LHS
LED
RHS
LED
Comment
Disable
Remote Programming
Mode Press
<Disable
Remote
Control>
button on
VRC for 4
seconds N/A Solid Green Flashing Amber to
Solid Amber to Off Illuminator will go
to Operating
Mode. RHS LED
turns Off when in
Operating Mode.
Disable
Manual
Buttons Operating
Mode Press
<Disable
Remote
Control>
button on
VRC for 4
seconds N/A Solid Green –
After 4
seconds
Flashing Red
(Returns to
Solid Green
after button
release)
Off to Solid Amber,
then after 4
seconds Flashing
Red
(Returns to Solid
Green after button
release)
Must be done
within 5 minutes
of Disabling
remote (as
above) Change
will take effect
after 30 minutes
Create or
Change
PIN Programming
Mode Press
<Status
Button>
for 4
seconds Enter
valid PIN
charact
ers
x 4
Green to
Intermittent
Flashing Red /
Green Solid Amber to
Flashing Red
Flash qty counts
down the No. of
characters
required. After PIN created
Illuminator goes
to Programming
Mode (Standard
LED indication)
Enter
existing PIN Operating
Mode Press
<Status
Button>
for 4
seconds Enter
valid PIN
charact
er
x 4
Green –
Intermittent
Flashing Red /
Green Solid Amber to
Flashing Green
Flash qty counts
down the No. of
characters
required If invalid PIN
entered both
LEDs flash red and
unit will stay in
Operating Mode
Delete PIN Programming
Mode
Press
<Status
Button>
for 4
seconds Press
<Re-Set>
button 4
times Green –
Intermittent
Flashing Red /
Green Solid Amber to
Flashing Red Flash
qty counts down
the No. of
characters
required After PIN deleted
Illuminator goes
to Programming
Mode (Standard
LED indication)
For full PIN function detail (inc valid PIN characters) – see FULL instruction
guide