2
www.raytecled.com
UK / Europe Tel: +44 (0) 1670 520055
Americas Tel: + 1 613 270 9990
1. Safety instructions
1. Read this leaflet carefully before commencing to install the WARRIOR unit and retain it
for future use. Installation can only be carried out by suitably qualified personnel.
2. Check the certification to ensure that the, mains supply and ambient temperature
present is suitable for the environment the unit is being installed in.
3. If the WARRIOR unit is to be installed in areas of high vibration, please consult with
Raytec.
4. Externally the WARRIOR unit housing is constructed from marine grade aluminium and
polycarbonate outer optic, stainless steel brackets/fasteners and silicone gaskets, internally
there are many non metallic components. The end user must ensure that these materials
are suitable for the environment the WARRIOR unit will be installed in.
5. Plastic components may be cleaned with water containing a small amount of detergent,
followed by a clean water wash. Chemicals/ oils that come into contact with plastic
parts may cause stress cracking and premature componentfailure.
5. Check certification label on cover of luminaire to ascertain type of threaded cable entry
on the luminaire. Select suitably certified cable glands and stopper plugs, these must
be parallel thread, have a minimum of 5 full thread engagement and
be of a
medium/fine tolerance to ISO965-1 and ISO965-3. The cable entry devices selected
must maintain the IP rating of the luminaire
6. The incoming mains cable should not exceed a temperature rise of 27
o
C above the
ambient conditions; select suitable cable.
7. When the unit is installed correctly and in accordance with these installation instructions
it will not harm humans or animals.
8. The light source contained in this luminaire shall only be replaced by the manufacturer or
his service agent or a similar qualified person.
!
Install in a well
ventilated area
Do notcontinually
stare at lamp
Isolate mains before
removing cover
1.5m
Replace any cracked protective shield
Order SPX-BKT-RL-G2 from Raytec Ltd
