Raytec PULSESTAR VTR4, Installation Manual, Page: 35 / 38

31
10.5
Command summary
Command Example Effect
AT AT
Reports the temperature of
the LED PCBs.
AW AW Save changes.
CL CL Clear configuration.
ST ST Show configuration.
GT GT1 Enable Ethernet messages.
GR GR Clear any error conditions.
EY EY65,66 Set webpage password to 'AB'.
VR VR Read the firmware version.
RW RW1,50 Set channel 1 to 50%, switch mode.
RT RT1,3,100us,50
Set light to strobe with 3ms pulses,
delayed by 100us, at 50% bright- ness.
RE RE1,4
Trigger on falling edge of trigger
input.
TT TT1,100ms Set internal triggers every 100ms.
TR TR1 Triggers an output pulse.