38
10.4
Command summary
Command
Example
Effect
AW
AW
Save changes.
CL
CL
Clear configuration.
ST
ST
Show configuration.
GT
GT1
Enable Ethernet messages.
GR
GR
Clear any error condition.
EY
EY65,66
Set web page password to 'AB' (where 'A' is ASCII
character 65, and 'B' is 66, and so on). See note
below.
VR
VR
Read the firmware version.
RW
RW1,50
Set channel 1 to switched mode, 50% brightness.
RT
RT1,3,100us,50
Set light to strobe with 3ms pulses, delayed by
100ms, at 50% brightness.
RE
RE1,4
Trigger on falling edge of trigger input.
TT
TT1,100ms
Set internal triggers every 100ms.
TR
TR1
Trigger an output pulse.
Note:
The password can be any string of ASCII characters separated by commas.
Alternatively, you can set the password without having to use ASCII numerical
characters by using a web browser to access the VCT6's web pages as described in
Section 9, Webpage configuration.
