USER MANUAL
10
Subnet Mask
: Subnet mask is a network parameter which defines a range of IP addresses that
can be used in a network. If IP address is like a street where you live then subnet mask is like a
neighborhood. The subnet address also consists of four groups of numbers, separated by periods.
For example, “255.255.000.000”.
Gateway
: This address allows the WIRELESS NVR to access the Internet. The format of the
Gateway
address is the same as the
IP Address
. For example, “192.168.001.001”.
DNS1/DNS2
: DNS1 is the primary DNS server and DNS2 is a backup DNS server. Usually should
be enough just to enter the DNS1 server address.
Port
Web Port:
This is the port that you will use to log in remotely to the WIRELESS NVR (e.g. using
the Web Client). If the default port 80 is already taken by other applications, please change it.
Client Port:
This is the port that the WIRELESS NVR will use to send information through (e.g.
using the mobile app). If the default port 9000 is already taken by other applications, please
change it.
RTSP Port:
This is the port that the WIRELESS NVR will be allowed to transmit real-time
streaming to other device (e.g. using a streaming Media player.).
UPNP:
If you want to log in remotely to the WIRELESS NVR using Web Client, you need to
complete the port forwarding in your router. Enable this option if your router supports the UPnP. In
this case, you do not need to configure manually port forwarding on your router. If your router does
not support UPnP, make sure the port forwarding is completed manually in your router.
