2
Information
Instructions
This manual contains the technical information, safety
guidelines, and detailed operation instructions for Edge
E1 DLP 3D printers. Please keep it properly.
Please read this manual carefully before using the
printer. Failure to comply with the safety and operating
instructions required by this manual will result in
consequences that are the sole responsibility of the
user.
All information contained in this manual is up to date
at the time of printing, but may be subject to change
without notice as products are upgraded.
The images used in this manual may differ from your
printer due to differences in specific models and
specifications.
If you have any improvement or modification opinions
on this document and the product, or If there is any error,
please inform us in time. Thank you for your valuable
comments on our products.
©2022 Suzhou Laisai Technology Co., Ltd. All rights
reserved. No part or all of this manual may be
reproduced or copied without written permission.
Instructions of mark
Warning
:
Could result in serious personal injury or
equipment damage if it was failed to comply with
this requirement.
Attention
:
Could result in minor personal injury or
equipment damage if it was failed to comply with this
requirement.
Important Information
:
The normal operation
of the device or the quality of printed models would
be influenced if it was failed to comply with this
requirement .
Protection requirements
:
Corresponding
precautions should be taken as required.
Hazard indication
:
Description of specified hazard.
UV
Summary of Contents for Edge E1
