Raypak Xfiire 300B, Installation And Operation Manual

Page: 52 / 72

52
Monitor Menu
The Monitor Menu records and displays critical Heater information, such as, Cycle times, Run times, and Maximum/
Minimum temperature readings depending on the setup.
Item Application Description
RUN TIME Burner 1 All Burner run time (hours). Press UP/DOWN for 1 sec to clear
Cycles Burner All Number of burner cycles. Press UP/DOWN for 1 sec to clear
RUN TIME Heater pump All Heater pump run time (hours). Press UP/DOWN for 1 sec to clear
RUN TIME System pump All System pump run time (hours). Press UP/DOWN for 1 sec to clear
RUN TIME DHW pump H MODE 2, 3 DHW pump run time (hours). Press UP/DOWN for 1 sec to clear
OUTLET HI All Records the highest heater outlet temperature. Press UP/DOWN for 1 sec to clear
OUTLET LO All Records the lowest heater outlet temperature. Press UP/DOWN for 1 sec to clear
INLET HI All Records the highest heater inlet temperature. Press UP/DOWN for 1 sec to clear
INLET LO All Records the lowest heater inlet temperature. Press UP/DOWN for 1 sec to clear
DELTA T All
Captures the highest Delta T Temperature recorded. Press UP & DOWN buttons for 3
sec to clear this entry
OUTDOOR HI H MODE 1, 2, 3 Records the highest outdoor temperature. Press UP/DOWN for 1 sec to clear
OUTDOOR LO H MODE 1, 2, 3 Records the lowest outdoor temperature. Press UP/DOWN for 1 sec to clear
SYSTEM HI All Records the highest supply temperature. Press UP/DOWN for 1 sec to clear
SYSTEM LO All Records the lowest supply temperature. Press UP/DOWN for 1 sec to clear
IND HI H MODE 1, 2, 3 Records the highest Indirect supply temperature. Press UP/DOWN for 1 sec to clear
IND LO H MODE 1, 2, 3 Records the lowest Indirect supply temperature. Press UP/DOWN for 1 sec to clear
TANK HI WH Records the highest TANK temperature. Press UP/DOWN for 1 sec to clear
TANK LO WH Records the lowest TANK temperature. Press UP/DOWN for 1 sec to clear
PIM DIP SWITCHES PIM DIP SW configuration
VERSA DIP SWITCHES VERSA DIP SW Configuration
PIM SW Revision Software revision number
Table Y. Monitor Menu
Toolbox Menu
The Toolbox Menu logs all error codes from the VERSA and PIM, as well as other functions. Up to 15 error codes can
be logged.
Item Description
Lookup Active Error Look up and display the active error info
USER TEST Select ON to start the function. The setting returns to default after the test is run
MAX HEAT
Select ON to start the function. The setting will time out to OFF after 24 hours or can be set to OFF again
by the user. See VERSA IC Manual
(5000.72)
for details
P/N XXXXXX Software number of the Raypak VERSA
DEFAULTS
Resets to factory settings. Press UP and DOWN for 1 second to show CLR and load factory defaults to all
settings. This will also clear all history
HISTORY
lookup logged error
Displayed when an error code is present. 1 indicates the most recent error code. Press UP and DOWN for
1 second to clear the error logs
Table Z. Toolbox Menu