Raypak TempTracker mod+ Hybrid, Installation And Operation Instructions Manual

Page: 15 / 56

TempTracker mod+ Hybrid Installation and Operation Manual 15
HTC# 059105-00D
Wiring the 4-20ma Modulating Boilers
(A Terminals 13, 14), (B Terminals 16, 17),...
• The TempTracker mod+ Hybrid can operate up to four 4-20 mA modulating motors.
• The Extension can operate up to six 4-20 mA modulating motors.
• The TempTracker mod+ Hybrid and the Extension sources excitation voltage for the 4-20mA signal.
• Wire the (-) from the boiler modulating motor to the (GND) terminal on the TempTracker mod+ Hybrid. That is
for boiler A, the modulating (GND) terminal will be 13.
• Wire the (+) from the boiler modulating motor to the (mA+) terminal on the TempTracker mod+ Hybrid. That is
for boiler A, the modulating (mA+) terminal will be 14.
SYSTEM
A
B
C
D
1 2
RUN PROGRAM
DO NOT APPLY ANY VOLTAGE
TO INPUT TERMINALS
3 4 5 6 7 8 9 10 11 12 13 15
14 17
16 18 20 19
21 24
23 29 25
27
26 28 32 30 31
L N
-
+ +
T T O O RS-485
mA GND VLT
SYS A B C D PWR
CUR / VLT
A
-
+ +
mA GND VLT
-
+ +
mA GND VLT
+ +
mA
22
-
GND VLT
+
mA
TEMP
OUTDOOR
O O
TEMP
SYSTEM
EXTENSION
MODULE
CUR / VLT
B
CUR / VLT
C
CUR / VLT
D
PROVE
/DHW
SHUTDOWN
/SETBACK
FOR ALL CIRCUITS
120VAC, 6A RESISTIVE
OUTPUT RATINGS:
1A PILOT DUTY, 15A TOTAL
115VAC 60Hz , 30VA MAX
INPUT RATINGS:
USE COPPER WIRE,
CLASS 1 WIRE ONLY.
CAUTION
: RISK OF ELECTRIC SHOCK
More than one disconnect switch may be required
to de-energize the equipment before servicing.
ENCLOSED
ENERGY
MANAGEMENT
EQUIPMENT
99RA
/TSTAT
HYBRID
Boiler 4-20mA
Modulation Output
4-20mA
Burner
Motor
-
+
OD=
55
o
F SYS=
142
o
F
<A> B
80% 50%
STAGE
◄ ►
MENU
Modulating Boiler (Modulating Boiler type)
Wiring the Voltage Modulating or staging Boilers
(A Terminals 13, 15), (B Terminals 16, 18),...
• The TempTracker mod+ Hybrid can operate up to four 0-10V modulating motors.
• The Extension can operate up to six 0-10V modulating motors.
• Wire the (GND) from the boiler modulating motor to the (GND) terminal on the TempTracker mod+ Hybrid. That
is for boiler D, the modulating (GND) terminal will be 22.
• Wire the (VLT+) from the boiler modulating motor to the (VLT+)terminal on the TempTracker mod+ Hybrid.
That is for boiler D, the modulating (VLT+) terminal will be 23.
SYSTEM
A
B
C
D
1 2
RUN PROGRAM
DO NOT APPLY ANY VOLTAGE
TO INPUT TERMINALS
3 4 5 6 7 8 9 10 11 12 13 15 14 17 16 18 20 19 21 24 23 29 25 27 26 28 32 30 31
L N
- + +
T T O O RS-485
mA GND VLT
SYS A B C D PWR
CUR / VLT
A
- + +
mA GND VLT
- + +
mA GND VLT
+ +
mA
22
-
GND VLT
+
mA
TEMP
OUTDOOR
O O
TEMP
SYSTEM
EXTENSION
MODULE
CUR / VLT
B
CUR / VLT
C
CUR / VLT
D
PROVE
/DHW
SHUTDOWN
/SETBACK
FOR ALL CIRCUITS
120VAC, 6A RESISTIVE
OUTPUT RATINGS:
1A PILOT DUTY, 15A TOTAL
115VAC 60Hz , 30VA MAX
INPUT RATINGS:
USE COPPER WIRE,
CLASS 1 WIRE ONLY.
CAUTION : RISK OF ELECTRIC SHOCK
More than one disconnect switch may be required
to de-energize the equipment before servicing.
ENCLOSED
ENERGY
MANAGEMENT
EQUIPMENT
99RA
/TSTAT
HYBRID
Boiler Voltage
Modulation Output
Voltage
Burner
Motor
GND V+