R.ESPINAR S.L.
AEi/01
9/22
The microprocessor of this autoclave has 10 programs, numbers from P0 to
P9. First 4, from P0 to P3, are protected programs and they come programmed
from the factory with the usual parameters for sterilization.
These pre-set programs are:
Prog. Nº Temp. (
°
C) Press
(bar)
Ster, time.
(minutes)
Ster. Mode Drying time
minutes
P0
115 0,6 60 Solids
12
P1
121 1,1 30 Solids
25
P2
133 2,1 20 Solids
30
P3
121 1,1 20 Liquids
-
This programs cannot be modified, in case of modification protect or unprotect more
numbers of programs. See the programs protected.
To edit different sterilization programs , use the programs between p4-p9 both included.
ALPHANUMERIC DISPLAY FUNCTIONS
P7
121ºC
020min.
30min.
SEC:
SOL.1
The alphanumeric screen apart from showing the sterilization parameters, also shows a
warning, failure and other messages. See WARNING MESSAGES and FAILURE
MESSAGES.
PROGRAM INTRODUCTION
